# NOTE Lines must not exceed 132 characters 

# Config version 1.54

# User Modifiable Parameters DO NOT EDIT WITH NOTEPAD++ THE FILE WOULD NOT WORK

waterjetcutter.fill_cycle_hystersis_seconds   16.5              # prevent tank wave noise on float sensor. Default = 16.5sec.  (Min-5, Max-20)


waterjetcutter.filter_cleaning_seconds        80                # filter clogging variable. Default = 26.4sec. 1.5 (10m hose, 0head) 5.5 = 90 


waterjetcutter.fill_cycle_seconds             100               # still in testing


waterjetcutter.abrasive_hopper_timer_seconds  3600              # time to deplete dry abrasive hopper. Default = 3600sec


waterjetcutter.release_pressure_seconds       0.4               # time to release the HP line pressure. Default = ~0.8 (Min = 0.3)


waterjetcutter.z_height_jog_interval_checksum 10.0              # the jog interval during the setup of the cutting head height