This is a guide to the Setup & Maintenance menu on the WAZER Controller

Input / Output Check

When things are not working as they should on the WAZER, this menu lets you control devices and access sensors individually to verify they are all operating correctly.

With the help of guided menus, this mode allows you or with the help of our Technical Support team to diagnose errors without opening up the Control Box or sending the machine back for repair.

Jog

When setting up a cut it is convenient to be able to move the nozzle as you please. This menu item enables that feature.

Cut Rate Testing

Wam allows you to add your own entries to the Material Library, and this requires you to test the material with WAZER to determine the appropriate settings. This mode has all Test Files stored onboard and guides you through the procedure using built-in routines to determine the correct cutting speed for new materials.