Maintenance Schedule
Short-Term Service
Interval: 20-100 hours
(350 – 1,650 lbs. of abrasive)
Medium-Term Service
Interval: 300 hours
(5,000 lbs. of abrasive)
Long-Term Service
Interval: 600 hours
(10,000 lbs. of abrasive)
Seasonal Service
Throughout the year you may need to make adjustments or perform preventative maintenance to protect your WAZER from seasonal weather and other environmental factors.
Additional Hardware
A checklist of additional hardware user’s will find resourceful when incorporating WAZER’s workflows into their daily routines.
[NOTICE] When performing Service, Maintenance, or Repair, use ONLY identical replacement parts provided by WAZER.
[WARNING] WAZER tracks the number of hours it has been running. Please check the “Total Cut Time“ in the maintenance menu regularly. If you do not abide by the regular maintenance procedures and schedule, the warranty and support for your WAZER will be void.
Before servicing WAZER:
Turn off or close the On/Off Valve or water supply to the machine.
Purge the high-pressure system by properly ending/completing a cut or performing a Nozzle Purge.
Turn off WAZER and disconnect AC power from WAZER and the Pump Box.
Never remove the cover of the Pump Box while it is plugged in.