ERROR: Unexpected End of Cut File
If you are running a Cut File from a SD Card, WAZER will alert you if it ever loses connection with the file that it is reading from.
If this error occurs, it means that you will have to restart your Cut. Before continuing, however, we recommend that you try to identify the cause: check to see if the SD Card is fully seated in its slot. If it wasn’t, then it likely got bumped
or moved after you started cutting. If it is fully seated, then a read error may have happened; you should restart your Cut.
If this error happens subsequently, try another SD Card.
If you are eager to have the cut job completed, and no other SD cards are around, you can also transfer the Cut File onto WAZER’s onboard Micro SD Card and run the Cut directly from there. Please see the steps below:
Turn off WAZER. Unplug the microSD card from the controller.
Plug it into a laptop or computer
Remove the (.temp) file from the microSD card.
Transfer the g code to the microSD card.
Remove the SD card from the UI board. Plug back the microSD card.
Switch on the main unit, and carry on file selection as usual.
If you choose to run the Cut File from the onboard Micro SD Card, make sure not to leave a standard SD Card plugged into WAZER, otherwise you won’t be able to view the files on the machine’s Micro SD Card. This fix will keep you cutting, but we suggest you contact Customer Support to further diagnose the issue.