RESOURCES > > Labels

Peelable Machine Warning Labels

This page serves to explain and substantiate the Peelable Warning Labels you see around the Machine. If you get here by scanning the QR code on the Permanent Labels, please scroll to the labels you have scanned and read the explanation and substantive material carefully.

Peelable Warning Labels can be removed from the machine after set up.

WAZER G2 Base Main Unit Peelable Labels

WAZER G2 Base Main Unit (Desktop) Peelable Warning Labels

Low Water Level Turn on Label

This label instructs you to be sure to fill the WAZER Main Unit to the correct level before expecting it to turn on. It also instructs you to prime the high pressure system before attempt a cut.

You may peel it off after installation.

 

Terms and Conditions Assurance Product Label

 

Terms and Condition Assurance Label

This label instructs you to not plug in the power, or water to the machine prior to reading the user manual and being sure that all previous steps were completed successfully. The pictogram means the following:

  • Do not Connect Main Plug to Electric Outlet

  • Do not Connect Water lines

  • Refer to Instruction Manual

You may peel it off after acknowledging our terms of service and installation.

 
 
 

Main Unit Hoop Lift Label

This label warns you of the heavy weight of the WAZER Main Unit and instructs you to use the proper lifting technique when moving it. The pictogram means the following:

  • Warning: Heavy Weight; Use Proper Lift Techniques

  • Lift WAZER G2 Base Main Unit (Desktop) from bottom of the hoop.

You may peel it off after installation.

 
 
 

WAZER Tear Open Product Label

This label instructs you to lift from the correct location when installing or moving the WAZER Main Unit to not cause damage to the machine. The pictogram means the following:

  • Do not lift WAZER G2 Main Unit (Desktop) from the top

  • Cut open the packaging box

  • Lift from the bottom of the hoop to set up or move the Main Unit (Desktop)

You may peel it off after installation.

 

Water Sensor Label

This label instructs you to put in 9v Battery into the water sensor. This label is at the bottom of the water alarm, which is not connected to the Main Unit (Desktop). The pictogram means the following:

  • This alarm emit high volume sound when triggered

  • This alarm is powered by a 9V battery.

 

WAZER G2 Base Pump Box Peelable Label

WAZER G2 Base Pump Box Peelable Warning Labels

 
 

WAZER Pump Box Lift Label

This label instructs you to the proper lifting technique and locations when installing or moving the WAZER Base Pump Unit in an effort to not damage the machine. The pictogram means the following:

  • General Warning

  • Warning: Heavy Weight; Use Proper Lift Techniques

  • Lift from the bottom of the side plates of the Pump Box

You may peel it off after installation

 

WAZER Oil Plug Check Label

This Label instructs you to replace the Pump Vent Cap before any connections are made in order to not harm your WAZER Pump Box. The pictogram means the following:

  • Do not connect power to the Pump Box if red plug is in place

  • Connect power to the Pump Box after the red plug is replaced with yellow vent cap.

  • The red plug or yellow vent cap is located like this on the water pump .

You may peel it off after installation

 

WAZER Pro Peelable label

 
 

WAZER G2 Pro Peelable Warning Labels

Low Water Level Turn on Label

This label instructs you to be sure to fill the WAZER Main Unit to the correct level before expecting it to turn on. It also instructs you to prime the high pressure system before attempt a cut.

You may peel it off after acknowledging our terms of service and installation.

 
 
 

WAZER Pro Lift and Move Label

This label warns you of the heavy weight of the WAZER Pro and instructs you to use the proper jacking and transport technique when moving it. The pictogram means the following:

  • Warning: Heavy Weight; Use Proper Lift Techniques. This machine weighs over 100kg

  • Warning: Do not lift WAZER Pro from its sides

  • Cut or break open the packaging box

  • Use a pallet jack to lift and move WAZER Pro.

The detailed lift and move instruction is provided on page 28 to 30 of user manual. Please refer to the Jacking Point labels on the back of the WAZER Pro.

You may peel it off after installation.

 

Terms and Condition Assurance Label

This label instructs you to not plug in the power, or water to the machine prior to reading the user manual and being sure that all previous steps were completed successfully. The pictogram means the following:

  • Do not Connect Main Plug to Electric Outlet

  • Do not Connect Water lines

  • Refer to Instruction Manual

You may peel it off after acknowledging our terms of service and installation.

RESOURCES > > Labels