Permanent Machine Label Explanation
This page serves to explain and substantiate the Permanent Warning Labels you see around the Machine. If you get here by scanning the QR code on the Permanent Labels, please scroll to the labels you have scanned and read the explanation and substantive material carefully.
Permanent Warning Labels cannot be removed from the machine.
WAZER G2 Base Main Unit Permanent Labels
WAZER Base Main Unit Permanent labels
WAZER Main Unit Primary Label
This label warns you of the operation, maintenance, and repair hazards of the WAZER Main Unit. It also contains the necessary technical information about the main unit. Please download the full user manual to refer to the maintenance procedure, or check out the maintenance section for more maintenance information.
The pictogram above means the following:
Warning: Entanglement Danger
Warning: Electricity
Warning: Sever Danger
Warning: Heavy Weight (>25kg); Use Proper Lift Techniques
No Children Allowed
Refer to Instruction Manual
Wear Eye Protection
Check Guard During Operation
WAZER Main Unit Serial Number Label
This label contains certification markings, model number, date of manufacturing and Serial numbers of the main unit. The pictogram means the following:
Class III appliance
WEEE compliant, do not discard this machine in trash
CE compliant
RoHS compliant. RoHS directive listed chemicals content are within legal limit
Hose Disconnect Warning Label
This label warns the user the danger of disconnecting high pressure hose. It instructs users to follow the correct hose disconnect procedure. The pictogram means the following:
Warning: Electricity
Do Not Disconnect Water Lines
Refer to Instruction Manual
The proper water hose disconnect procedure is as follows:
Turn off water input
Purge the residual pressure in High-Pressure Hose by selecting Setup & Maintenance > Input and output check > Output > HP valve on the Control Panel.
Allow the HP valve check to finish.
Turn off WAZER.
Disconnect Pump Box and WAZER Power Cables.
Disconnect High Pressure Hose.
Unplug Water Inlet Hose.
Unplug Drain Hose.
Hot Surface Label
This label warns users of the existence of the high temperature hazard near its proximity. The pictogram means:
Do not touch
Warning: Hot Surface
WAZER G2 BASE Pump box Permannet Labels
WAZER Base Pump Box Permanent labels
WAZER Pump Box Primary Label
This label warns you of the operation, maintenance, and repair hazards of the WAZER Pump Box. It also contains the necessary technical information about the pump box. Please download the full user manual to refer to the maintenance procedure, or check out the maintenance section for more maintenance information.
The pictogram above means the following:
Warning: Entanglement Danger
Warning: Electricity
Warning: Sever Danger
Warning: Heavy Weight (>25kg); Use Proper Lift Techniques
No Children Allowed
Refer to Instruction Manual
Wear Eye Protection
Check Guard During Operation
WAZER Pump Box Serial Number Label
This label contains certification markings, model number, date of manufacturing and Serial numbers of the main unit. The pictogram means the following:
Class I appliance
WEEE compliant, do not discard this machine in trash
CE compliant
RoHS compliant. RoHS directive listed chemicals content are within legal limit
WAZER Pump Box Cover Opening Warning Label
This label warns you of the hazards associated with an improper opening of the WAZER Pump Unit. It also serves to instruct you of the proper opening procedure. The pictogram means the following:
Warning: Electricity
Warning: Entanglement Danger
Refer to Instruction Manual
Do Not Open Pump Cover
The proper cover opening procedure is as follows:
Turn off the water supply
Turn off the WAZER Main Unit
Disconnect the pump box power cable and signal cable
Loosen the captive screws on the pump box cover.
Hot Surface Label
This label warns users of the existence of the high temperature hazard near its proximity. The pictogram means:
Do not touch
Warning: Hot Surface
Electrical Enclosure Warning Label
This label warns you of the residual hazards inside the WAZER Pump Box Electrical Enclosure and instructs for it to not be opened up. The pictogram means the following:
Warning: Electricity
No Unauthorized Repair Allowed
Hose Disconnect Warning Label
This label warns the user the danger of disconnecting high pressure hose. It instructs users to follow the correct hose disconnect procedure. The pictogram means the following:
Warning: Electricity
Do Not Disconnect Water Lines
Refer to Instruction Manual
The proper water hose disconnect procedure is as follows:
Turn off water input
Purge the residual pressure in High-Pressure Hose by selecting Setup & Maintenance > Input and output check > Output > HP valve on the Control Panel.
Allow the HP valve check to finish.
Turn off WAZER.
Disconnect Pump Box and WAZER Power Cables.
Disconnect High Pressure Hose.
Unplug Water Inlet Hose.
Unplug Drain Hose.
WAZER G2 Pro Permanent Labels
WAZER Pro Permanent labels
WAZER Pro Primary Label
This label warns you of the operation, maintenance, and repair hazards of the WAZER Pro. It also contains the necessary technical information about the Pro. Please download the full user manual to refer to the maintenance procedure, or check out the maintenance section for more maintenance information.
The pictogram above means the following:
Warning: Entanglement Danger
Warning: Electricity
Warning: Sever Danger
Warning: Heavy Weight (>25kg); Use Proper Lift Techniques
No Children Allowed
Refer to Instruction Manual
Wear Eye Protection
Check Guard During Operation
WAZER Pro Certification Label
This label contains certification markings, model number, date of manufacturing and Serial numbers of the main unit. The pictogram means the following:
Class I appliance
WEEE compliant, do not discard this machine in trash
CE compliant
RoHS compliant. RoHS directive listed chemicals content are within legal limit
Hot Surface Label
This label warns users of the existence of the high temperature hazard near its proximity. The pictogram means:
Do not touch
Warning: Hot Surface
Electrical Enclosure Warning Label
This label warns you of the residual hazards inside the WAZER Pump Box Electrical Enclosure and instructs for it to not be opened up. The pictogram means the following:
Warning: Electricity
No Unauthorized Repair Allowed
Belt Guard Warning Label
This label warns you entanglement damage exist with revolving pulleys. Keep the Belt Guard in place during WAZER Pro operation. The pictogram means the following:
No Unauthorized Repair Allowed
Check Guard During Operation
Warning: Entanglement Danger
WAZER Pro Jacking Points Label
This label points out the proper jacking points of the WAZER Pro. It also warns you the heavy weight of the WAZER Pro. Lift from any other places may damage your WAZER Pro.