Move origin

This feature in the Cut Menu allows you to move the cut to a new location on the cut bed.

• This feature was developed in response to users having to recreate files in WAM when they wanted to move the cut to a new location on the bed.
• You will now notice a new item to the cut menu called “Move Origin”. When this feature is selected, you can move the nozzle to a new starting location by pressing the arrow keys.
• Once the new location is set, the firmware checks the cut extents. If these are outside due to the shift you will get a prompt.
• If the cut falls within the cut bed you can go to cut the material menu and start the cut.
• Each press of the button moves the gantry by 10 mm

View fullsize