RESOURCES > Maintenance > Upgrades

Updated parts in Accessory Kits

WAZER is constantly expanding and updating the accessories. New and useful parts are added into existing kit after we received feedback and suggestions from our customers. To get the most updated part list, refer to the content below

Desktop Accessories

Tool Case

  • No.2 Phillips screwdriver x 1

  • Cut Bed Bolt Tool (T shaped 6mm Hex Driver) x 1

  • Needle Nose Pliers x 1

  • Deburring Tool x 1

  • File x 1

  • Long Cut Bed Anchoring Screws x 10

  • Short Cut Bed Anchoring Screws x 10

  • Abrasive Hose Ends x 2

  • Abrasive Hose End O-ring x 4

  • High Pressure Hose Quick Disconnect O-ring x 2

  • Abrasive Hose x 1

  • 0.48mm Jewel Orifice x 1

  • 6A 24V DC Type I Fuse x 1

  • Silicone Nozzle Guard x 1

  • Nozzle Height Tool x 1

 

Accessory Box Case

  • Pump Oil (container may vary) x 1

  • Plumbing Kit x 1

  • Orange Tap Adapter x 1

  • Wall Mount kit x 1

  • Water Leak Alarm x 2

  • SD card x 1

  • Magnetic Drain Filters x 2

  • Abrasive Fill Cup x 1

  • Adhesive Hose Tie down

  • Cable Ties

 

Big Hose Kit

  • Exterior High Pressure Hose x 1

  • 3/8” OD PE water input hose

  • 1/2” OD PE drain hose

 

Filter Canister Kit

  • Input Water Filter Canister x 1

  • Canister Wrench x 1

  • Wall Mount kit

  • 3/8” Hose Fitting x 2

  • Flushing hose x 1

Pro Accessory Boxes

Intial SetUp Box

  • Sprayer Kit x 1

  • Tool Tray kit x 1

  • Plumbing Kit x 1

  • Orange Tap Adapter x 1

  • WAZER Pro Power Receptacle x 1

  • Wall Mount x 1

  • Water Leak Alarm x 2

  • SD card x 1

  • Magnetic Drain Filters x 2

  • Abrasive Fill Cup x 1

  • Adhesive Hose Tie down

  • Cable Ties

 

Workflow Box

  • Black Tool case

    • File x 1

    • Deburring Tool x 1

    • Needle Nose Pliers x 1

    • Cut Bed Bolt Tool (T shaped 6mm Hex Driver) x 1

    • No.2 Phillips screwdriver x 1

    • Vernier Caliper x 1

    • Seamer Pliers x 1

    • Nozzle Height Gauge x 1

    • Nozzle Guard x 1

    • Abrasive Hose x 1

    • Spare Backflow sensors x 3

    • Spare Pro Orifice x 1

    • 6A 24V DC Type I Fuse x 2

    • Long Cut Bed Anchoring Screws x 10

    • Short Cut Bed Anchoring Screws x 10

    • Abrasive Hose Ends x 2

    • Abrasive Hose End O-ring x 4

  • Used Abrasive Sand Bag x 10

  • Cart Kit

    • Cart platform x 1

    • Cart Casters x 4

    • Bolts and Nuts pack x 1

 

MAINTENANCE Box

  • Pump Oil (container may vary) x 1

  • Oil Pan x 1

  • Oil Replacement Funnel and hose x 1

  • Input Water Filter Canister Wrench x 1

  • Spare Nozzle Kit (optional)

  • Full Span Absolute Locating JIg x 1

 
RESOURCES > Maintenance > Upgrades