Feed Rate Override
You can increase or decrease the speed of a cut to compensate for changes during real-time cutting.
This can be a great crutch to just get through a cut in the event that your rates were incorrectly set or your machines starts to tailcut, preventing you from having to go all the way back to WAM or immediately troubleshoot your machine.
- This upgrade adds a Feed Line in WAM’s Cut Menu Dashboard (see below image) which indicates the current feed rate (100%).
- Users can now increase or decrease the feed rate by pressing the up/down arrow keys.
- Pressing either the up/down arrow keys increase/decreases the feed rate incrementally by 10%, for a minimum of 10% and a maximum of 400%