WAZER Support | The First Desktop Waterjet.
VIEW CART | MY ACCOUNT
Maintenance Forum Contact Support
WAM 2.0 Back to Wazer.com
Maintenance Forum Contact Support Back to Wazer.com
VIEW CART
MaintenanceForumContact Support
WAZER Support | The First Desktop Waterjet.
WAM 2.0Back to Wazer.com
RESOURCES > Maintenance > Procedures
NEXT: Restart Cut
RESOURCES > Maintenance > Procedures
  • Priming the Plumbing
  • Preparing for Long Term Storage
  • Nozzle Purge
  • Flipping or Swapping the Cut Bed and Inspecting the Tank Pierce Plate
  • Leveling the Cut Bed
  • Drain Filter Cleaning
  • Tank Cleaning Cycle
  • Checking the Abrasive Rate
  • Inspecting the High-Pressure O-Rings
  • Clearing the Dry Abrasive Hose
  • Clearing the Dry Abrasive Hose End
  • Quick Abrasive Check
  • Clearing the Dry Abrasive Hopper
  • Clearing the Filtration System
  • Tank Draining - Siphon Method
  • Venturi Clean Out
  • Updating the Firmware & Config File
  • Inspecting and Replacing the WAZER Fuse
  • Pump Box Rebuild
  • Register WAM Account

Maintenance

Setting up WAZER

Featured
Overview
Safety
Maintenance Schedule
Machine Procedures
WAM Procedures
Troubleshooting
Top Solutions
Tips & Tricks

Troubleshooting

Featured
Overview
Powering Up & Turning on the Machine
Error Messages
Cut Performance
Leaks
Used Abrasive Collection
Motion System
Water Level Management
System Flowcharts and Diagrams

Tutorials

Featured
Overview
Cut Project General Work Flow
Convert Image Edges to Cut Path
Understanding WAM G-code
Visualization of the G-code Cut File
How to CAD and Cut an Welcome Cut Multitool
Adobe Illustrator To WAM
Cut Internal Features on Existing Shape
New York
info@wazer.com
Hours
MaintenanceForumContact SupportBack to Wazer.com

Copyright © 2024 WAZER