RESOURCES > Maintenance > Pro Procedure Index

General Water Sealing Inspection

WAZER Pro is a machine that involves high pressure water stream. Several seconds spent checking for water leak and inspect water seal can help saves hours down the line.

General Cleaning

Keeping WAZER Pro clean is the first step to achieve a long-lasting operation.

Flipping or Replacing Cut Bed

Cut bed is a consumable item, its structure is depleted gradually but the high pressure steam from the Nozzle. When the Cut Bed is too worn to hold the cut material solidly or evenly, it is time to flip or swap the Cut Bed.

Inspect Use Abrasive Accumulation

While the Cut Bed is out of the WAZER Pro either for Flipping or Replacement, it is always a good chance for you to measure the used abrasive accumulation in the tank bottom. If you detect any accumulation, it is always recommended to clear it in the early stage than let it deteriorate.